Originally Posted by MDH33
Even a tiny amount of corrosion in the caliper or on the piston will cause the brakes to not release 100%.
Hmmm. The caliper was quite clean after I removed all the gunk, but there was a little scoring on one of the pistons. Although I polished it some, maybe that is the problem. I can still get a new caliper housing unit, and maybe even some pistons. I guess that will be my next step if the MC rebuild dosn't do it. Thanks, Martin!
Sascha Steinway TLCA # 20217
1977 FJ40 "Ripper" (because it shreds!) (What is a "shread"...Steve Crase)
1988 FJ62 "Dino" OME, my next project
2000 4 Runner, my daughter's truck, thanks Dan!
2013 F-150 "Black Ops"