View Single Post
  #4  
Old 09-05-2012, 06:13 AM
powderpig's Avatar
powderpig powderpig is offline
Hard Core 4+
 
Join Date: Aug 2005
Posts: 1,351
Default

Corbet, you may also want to weld up your sway bar tab before you weld this in place. This tab can be broken off and take a brake line out. When this happened to me several years ago, I first welded up the hole, then tacked the bracket in place. I welded inside and out side of the bracket to axle houseing. Welded the brake and all has been good for several years.
Good luck with your project.
Reply With Quote