View Single Post
Old 09-16-2012, 01:14 PM
Corbet's Avatar
Corbet Corbet is offline
Hard Core 4+
Join Date: Oct 2006
Location: Durango, Colorado
Posts: 4,215

Got the hole in the housing fixed. I had washed the area with a lot of dish soap to remove the 90wt. Then as I used my Dremel tool to prep the area for welding it was apparent that a number of hairline cracks were traveling along the OEM welds. I think the vibration of the Dremel really helped to identify the cracks. The dust filled in the cracks. So I drilled a number of holes where the cracks appeared to end. Then filled them with the welder in addition to the original hole.
Attached Images
Speski OffRoad LTD, Cargo Solutions for Toyota 4x4's
"80 series, with a fridge"
1976 FJ40, Project with little progress.
2004 Starcraft 10RT

Reply With Quote