View Single Post
  #6  
Old 10-22-2012, 12:36 PM
Romer's Avatar
Romer Romer is offline
Rising Sun Member
 
Join Date: Aug 2005
Location: Englewood, Colorado
Posts: 6,958
Default

Quote:
Originally Posted by CardinalFJ60 View Post
They used to be on the same positive, then I ran a separate power/ground to the fridge to try to fix that interference - no improvement with that...hmmm...ground is the next I'll check.
Could be a loose or improper ground. Might also check to make sure the ground from your battery/alt has a good connection. I remember having to take teh bolt off and grind a bit in the engine block on my 40 to get a good contact

measure from battery to a point on the chassis, should be very few miliohms. measure from the fridge ground to chasssis and should be the same

Make sure all your connections are tight with good metal to metal contact
__________________
Ken Romer - K0ROM
04 UZJ100
11 RX350
02 Kimberley Kamper
09 BMW Z4 sDrive30i
Reply With Quote