View Single Post
Old 11-01-2012, 05:32 PM
PhatFJ PhatFJ is offline
Rising Sun Member
Join Date: Apr 2008
Location: Trinidad, CO
Posts: 670

Originally Posted by AHorseThief View Post
When I get there, I'll definately give you a holler.
Yes, make sure you use the correct rivets (solid)!! I ended up making my own set tool to match the height I was working at 30" or so.. After you rivet the gutter on make sure you blend the gutter to the top with epoxy, I used a marine grade and it worked well.. Just take your time and ask questions if you need. You can get a finish that is as good as the factory..
Reply With Quote