Thread: wheel building
View Single Post
  #7  
Old 05-21-2013, 06:02 PM
smslavin's Avatar
smslavin smslavin is offline
Hard Core 4+
 
Join Date: Dec 2010
Location: On a plane...
Posts: 642
Default

Quote:
Originally Posted by nakman View Post
Nice. So do you have a truing stand you use? upside down fork? Do you measure the runout, if so what's a good number (both directions) or do you just eyeball that? Just curious, always wanted to build a wheel one day.
Yea I do. It's the Feedback Sports single arm stand. Works well but I think I should have just ponied up for the Park so I could bolt it to the workbench. I use a through axle adapter from Abbey Bike Works which is awesome because it'll handle 12, 15 and 20mm hubs. I've got a dishing tool to measure the dish but you could make one pretty easily.

I've got to rebuild my road wheels here soon. The nipples are pretty corroded from all the years of being near the ocean and the rims have taken a beating. I'll let you know when I do and you're more than happy to swing by and try lacing them. I'm not a speed demon by any means in the build process. Usually takes me a couple hours per wheel.


Sent from my iPhone using Tapatalk
__________________
{ slavin photography | KJ6LDF }
Reply With Quote