View Single Post
Old 10-07-2013, 12:39 PM
DaveInDenver's Avatar
DaveInDenver DaveInDenver is online now
Hard Core 4+
Join Date: Jun 2006
Location: Larimer County
Posts: 7,864

Originally Posted by nuclearlemon View Post
why do you have sleeves in your bushings?
I dunno, that's the way OME did it (all poly bushings, OME SB43 kit). Fixed end spring eye is 40mm, the bushings are 40mm OD, 19mm ID and the sleeve is 19mm OD and 14mm ID for the bolt. I was wrong, the fixed end bolt is the factory bolt, not greaseable.

In the back I'm running aftermarket shackles with greaseable 18mm bolts at both the frame and spring, bushings have 30mm OD and 18mm ID, no sleeve necessary.

The factory used sleeved bushings at both ends of the springs with 14mm bolts. The frame side shackle bolt was 18mm.
'91 Pickup - Imelda / '08 Tacoma TRD - Donna
'09 Kawasaki KLR650
'98 Rhygin Juke SS / '12 Gunnar Rockhound 29 / '16 REEB Dikyelous

"Our task must be to free ourselves from this prison by widening our circle of compassion to embrace all living creatures and the whole of nature in its beauty. Nobody is able to achieve this completely, but the striving for such achievement is in itself a part of the liberation and a foundation for inner security. " --Albert Einstein
Reply With Quote