Thread: Tie Downs
View Single Post
Old 11-15-2005, 09:29 AM
Red_Chili's Avatar
Red_Chili Red_Chili is offline
Hard Core 4+
Join Date: Aug 2005
Location: Littleton CO
Posts: 8,400

Actually, the stock tiedowns are just OK for light items, and are not particularly conveniently placed. If you tie down a tire though, be advised your tire may demonstrate aerodynamic qualities in a crash if you just use the stock tie downs. If you are still around to care, you will have new drain holes in the floor where the tie downs used to be.

Far better would be to weld a captive nut to some fairly size-ish 3/16" plate or thick large washers, then attach same to the floor via welding or epoxy to just hold it conveniently in place. Then put 'em wherever you want.

Will tack weld for pizza. You purchase, cut, drill and fasten.
-Bill Morgan
Heb Dduw, heb ddim; Duw a digon
Abnormally aspirated
Bio Page
I'm that gun-totin', farm-raised, evangelical, pro-environment, OHV ridin'/drivin', Southern civil rights pro-labor Liberal yo' momma told you couldn't possibly exist.
Reply With Quote