Thread: Bolt size Q
View Single Post
  #3  
Old 02-02-2006, 10:34 PM
Rzeppa's Avatar
Rzeppa Rzeppa is offline
Cruise Moab Committee
 
Join Date: Aug 2005
Location: Kittredge CO, USA
Posts: 4,969
Default

Stock spring center pin bolts are M8x1.25 with 12mm head. That's JIS. Aftermarket are whatever.

Edit: Should have paid closer attention to the original post: The spring end pin bolts are also M8 x 1.25 with 12mm head JIS. IIRC stock is about 25mm long. In that applicatiob DIN/ISO will also work, as there is plenty of clearance for the 13mm heads. Also in that application, in my experience, those bolts don't matter to get you home :-)
__________________
Jeff Zepp
Kittredge CO USA
1971 & 1976 FJ40s, 1978 FJ45, 1987 FJ60
Rising Sun 4WD Club, TLCA #4063
http://american3dprinting.net/

Last edited by Rzeppa; 02-02-2006 at 10:39 PM.
Reply With Quote