View Single Post
  #2  
Old 02-13-2008, 12:09 AM
JohnInDenver JohnInDenver is offline
Wincher
 
Join Date: Aug 2005
Posts: 76
Default A seperate ground

Install an exterior copper grounding rod as close as possible to the Ham.

Run a continuous 8 gauge copper wire from the new grounding rod to the Ham equipment only.

Don't run the antenna cable and the 8 gauge wire close to each other.

Install a copper grounding rod for an exterior antenna mast.

Install one 110v 20a circut just for the Ham related power load.
Reply With Quote