View Single Post
Old 01-06-2012, 11:06 AM
60wag's Avatar
60wag 60wag is offline
Rising Sun Member
Join Date: Aug 2005
Posts: 2,024

I not sure where the sending is on the 1FZ but you might try to measure the output with an ohm meter. Then if the gauge goes to zero again, you might be able to establish that there is a wiring or meter issue if the sending unit still has the same output.
'03 KTM 450EXC
"If you know what you're doing, then you aren't learning anything." - A. Lincoln
Reply With Quote