View Single Post
Old 06-17-2008, 02:38 PM
Squishy!'s Avatar
Squishy! Squishy! is offline
Rising Sun Member
Join Date: Mar 2007
Location: Littleton, CO
Posts: 2,219


Remove ADD cap and snap ring holding the axle in.

Remove four bolts on lower ball joint (14mm)

Remove sway bar bolts (14mm deep) (both sides) on lower control arms,

Remove lower bolt for the shock (22mm?) and use a jack to push on the hub to lift the hub up and away from lower control arm (the spring tension is on the upper a arm),

Remove the (6, 17mm) nuts on the CV that connect it to the diff,

Slide the spindle out of the hub and you are home free my man
-Justin Morgan,

TLCA #23166

"Squishy"-1988 Red Hilux Standard frame, X-tra cab, locked F&R, 5.29's, 35" tires and a SAS. In Moab STOLEN

"Apollo"-1988 Hilux, 1999 3.4L, Supercharged, 2.1" URD pulley, URD 7th injector, 2 1/2" Magnaflow exhaust, SOLD, then totalled

"RedChili"-1987 Super Beast

"Did you know the IFS was designed by Hitler himself to make the life of 4WD owners tough? Yeah, it's true, he saw a vision of the Devil and he told him to do it." -DaveInDenver
Reply With Quote