Rising Sun Member Forums  

Go Back   Rising Sun Member Forums > Other Hobbies > Ham & CB Radio Corner

Thread Tools
Old 06-18-2010, 07:27 PM
Romer's Avatar
Romer Romer is offline
Rising Sun Member
Join Date: Aug 2005
Location: Englewood, Colorado
Posts: 8,039

Good opportunity for our club. When we have details, lets post it up in the event staging area
Ken Romer - K0ROM
14 URJ200
77 FJ40
16 RX450
16 Kimberley Karavan

Reply With Quote
Old 07-09-2010, 03:59 PM
Seldom Seen's Avatar
Seldom Seen Seldom Seen is offline
Hard Core 4+
Join Date: Aug 2005
Location: Highlands Ranch
Posts: 564

Just received this email:

***** BULLETIN *****

07/09/10 14:00 MDT.

The Colorado Connection has not been sleeping.

There is a major movement by the Rocky Mountain Ham group to do a rebuild of the hub at Thoridon soon. A new controller and related system are in the works and hopefully will resolve the chop chop and the UHF growl we hear from time to time and reduced sensitivity on the repeater. Not to mention improvement to some of our weaker links such as the Springs. Keep your finger crossed for a successful project!!

We had a power outage on Baldy (Breckenridge) during the 4th of July week-end (bad timing) that has been corrected by our site manager.

Our UHF hub system in the Eagle area went down due to a critter that admired some of our cables. This site failure shut down a large portion of the western slop repeaters. A site trip was made by John - W0IG and Dave - KA0YDW Wednesday the 7th and it is back on the air.

Kremmling took a hard hit by lightning a week or so ago and plans are being made for replacement of the damaged equipment. Dave has already made several trips analyzing the situation.

There is a planned trip to the Mosquito pass site (Leadville) this week-end (Sunday the 11th) for routine maintenance and a check up. This site is solar and the batteries need to be checked and watered. This is a routine maintenance trip but visitors are welcome. Contact John - W0IG at HRO (303 745 7373) for details.

There is a major rebuild of our Baldy site planned for mid August that involves dismantling of our present building and moving into a better building that must be moved onto the old building site. Lots of work and there will be a call for volunteers to assist in this large project. Stay tuned!!

John - xxx for the Board of Directors
Reply With Quote
Old 07-12-2010, 09:48 AM
chtucker's Avatar
chtucker chtucker is offline
Join Date: Aug 2008
Location: Leadville
Posts: 244

If you need "parts" send me a list and will see what I have... I have mostly everything from GE Master IIIs to duplexers and hardline...

PM or email at mtnbronco@gmail.com
Reply With Quote

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -6. The time now is 01:04 PM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.