Rising Sun Member Forums  

Go Back   Rising Sun Member Forums > Toyota 4x4 > General Tech Forum

Reply
 
Thread Tools
  #1  
Old 08-02-2010, 06:58 PM
subzali's Avatar
subzali subzali is offline
Rising Sun member
 
Join Date: Aug 2005
Location: Denver CO
Posts: 7,383
Default t-case output/pinion nut size?

Anybody know the t-case output/pinion nut size for, say, a 1977 FJ40? I think a 1 1/8" socket will work, but I don't know if that means it's a loose 28mm or a tight 29mm.
__________________
Matt Miller
"Stay the Trail," "Tread Lightly," and "Leave No Trace" ethics
TLCA# 13684
Rising Sun Bio
1977 FJ40 2F "Brahma" + Lockright, tach, Warn 8274, FJ60 Power Steering, soon to lose the Sanden OBA to go back to factory emissions
2000 Tundra Limited TRD 2UZ-FE SOLD
Reply With Quote
  #2  
Old 08-02-2010, 08:35 PM
leiniesred leiniesred is offline
Hard Core 4+
 
Join Date: Aug 2005
Location: Aurora, CO, USA
Posts: 1,281
Default

27mm (I have Dr. Schleg's 40's rear diff on the bench right now.)

that would make it a pretty loose 1 1/8th and a very very tight 1 1/16th
__________________
KD0FDS
Stephen
Reply With Quote
  #3  
Old 08-02-2010, 09:06 PM
RockRunner's Avatar
RockRunner RockRunner is offline
Hard Core 4+
 
Join Date: Nov 2006
Location: Roxborough
Posts: 4,388
Default

Rudes is correct, took it apart 4 times and I have it engrained now

Matt where do you live, you can use mine if you want.
__________________
Thanks T aka Tom KR0MPS

Quote:
Originally Posted by RockRunner;
keys = Man that is a whole story


TLCA #6136
Going under the knife again !

85 4runner Marlin Ultimate 5" lift 40" MTR's Soft top and doors Towed to Moab by the Big Blue Whale, 07.5 Dodge Mega Cab Laramie 4" lift covered and chiped No more slow lane for me
Reply With Quote
  #4  
Old 08-02-2010, 09:10 PM
subzali's Avatar
subzali subzali is offline
Rising Sun member
 
Join Date: Aug 2005
Location: Denver CO
Posts: 7,383
Default

Just curious, thanks though Tom

Just thinking to add to my tool collection a little bit...I need a 54mm hub socket too...hmm...
__________________
Matt Miller
"Stay the Trail," "Tread Lightly," and "Leave No Trace" ethics
TLCA# 13684
Rising Sun Bio
1977 FJ40 2F "Brahma" + Lockright, tach, Warn 8274, FJ60 Power Steering, soon to lose the Sanden OBA to go back to factory emissions
2000 Tundra Limited TRD 2UZ-FE SOLD
Reply With Quote
  #5  
Old 08-03-2010, 10:46 AM
nakman's Avatar
nakman nakman is offline
Rising Sun Commander
 
Join Date: Aug 2005
Location: north side
Posts: 9,791
Default

Quote:
Originally Posted by subzali View Post
Just curious, thanks though Tom

Just thinking to add to my tool collection a little bit...I need a 54mm hub socket too...hmm...
Tom the t-case output is 27, right? pinion nuts are 32.

I bought a pretty cheap set of HF impact sockets a while back, they've got one that goes up to 32mm I think. They're pretty decent 6-pointers.. most of them are kicking around in the toolbox at home but the 24, 27, and 32 are definitely in the trail bag.
__________________
99 uzj100, 05 525EXC

www.gamiviti.com

Reply With Quote
  #6  
Old 08-03-2010, 12:27 PM
Jacket's Avatar
Jacket Jacket is offline
Rising Sun Member
 
Join Date: Feb 2007
Location: Lafayette
Posts: 3,873
Default

And 46 mm for the crank pulley nut (since we're brainstorming sockets for the tool collection....)
__________________
- Matt
1976 FJ40 - green and mostly stock
1996 FZJ80 - not so stock
Reply With Quote
  #7  
Old 08-03-2010, 07:01 PM
subzali's Avatar
subzali subzali is offline
Rising Sun member
 
Join Date: Aug 2005
Location: Denver CO
Posts: 7,383
Default

Quote:
Originally Posted by nakman View Post
Tom the t-case output is 27, right? pinion nuts are 32.
Tim, maybe your 80 is different than my 40 but I'm pretty sure the pinion and t-case output are the same on my 40.
__________________
Matt Miller
"Stay the Trail," "Tread Lightly," and "Leave No Trace" ethics
TLCA# 13684
Rising Sun Bio
1977 FJ40 2F "Brahma" + Lockright, tach, Warn 8274, FJ60 Power Steering, soon to lose the Sanden OBA to go back to factory emissions
2000 Tundra Limited TRD 2UZ-FE SOLD
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -6. The time now is 03:40 AM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.