Rising Sun Member Forums  

Go Back   Rising Sun Member Forums > Toyota 4x4 > General Tech Forum

Reply
 
Thread Tools
  #1  
Old 01-18-2013, 01:52 PM
nattybumppo's Avatar
nattybumppo nattybumppo is offline
Rising Sun Secretary
 
Join Date: Nov 2009
Location: Northwest Denver
Posts: 1,115
Default bearing puller needed

Does anybody have a bearing puller suitable for pulling transmission shaft bearings? The Toyota PN is 09950-20014 but it is no longer available. It has to have two arms with a long reach (at least 8.5 inches I'm guessing) and it probably has to have some good strength since these are press-in bearings. Now, if anybody has one, would you be willing to lend it out (or sell it cheap if you don't anticipate needing it again)? I need to rebuild my H42 in the 40.
__________________
Sascha Steinway TLCA # 20217
1977 FJ40 "Ripper" (because it shreds!) (What is a "shread"...Steve Crase)
1988 FJ62 "Dino" OME, now in the hands of my daughter
2013 F-150 "Black Ops"
Reply With Quote
  #2  
Old 01-18-2013, 05:14 PM
Air Randy's Avatar
Air Randy Air Randy is offline
Cruise Moab Committee
 
Join Date: Aug 2008
Location: Franktown, CO
Posts: 2,804
Default

I may have something like that. Come down and take a look if you want.
__________________
Randy Rosetta KDKWX TLCA #19351 69 FJ40 "Meanie" & 1970 Boss 302 Mustang
Reply With Quote
  #3  
Old 01-18-2013, 11:00 PM
DanS's Avatar
DanS DanS is offline
Rising Sun Member
 
Join Date: Jul 2010
Location: Idaho Springs
Posts: 412
Default

Quote:
Originally Posted by nattybumppo View Post
Does anybody have a bearing puller suitable for pulling transmission shaft bearings? The Toyota PN is 09950-20014 but it is no longer available. It has to have two arms with a long reach (at least 8.5 inches I'm guessing) and it probably has to have some good strength since these are press-in bearings. Now, if anybody has one, would you be willing to lend it out (or sell it cheap if you don't anticipate needing it again)? I need to rebuild my H42 in the 40.
I've still got Marco's puller. If it'll do an H55f, it'll do an H42, right?

I REALLY need to tear down that H55f and get it back to him.

Dan
Reply With Quote
  #4  
Old 01-19-2013, 08:29 AM
Old40Dog's Avatar
Old40Dog Old40Dog is offline
Cruise Moab Chairman
 
Join Date: Mar 2009
Location: Evergreen, Calirado
Posts: 1,288
Default

Quote:
Originally Posted by nattybumppo View Post
Does anybody have a bearing puller suitable for pulling transmission shaft bearings? The Toyota PN is 09950-20014 but it is no longer available. It has to have two arms with a long reach (at least 8.5 inches I'm guessing) and it probably has to have some good strength since these are press-in bearings. Now, if anybody has one, would you be willing to lend it out (or sell it cheap if you don't anticipate needing it again)? I need to rebuild my H42 in the 40.
Just put an H55 in it....you won't be disappointed!
__________________
Dave K,TLCA#20150,KFDOG,'69 FJ40,'92 FJ80 {Isuzu diesel conversion underway} ,2011 Replica M416 w/RTT,'98 Taco Xtracab 4X4, Project='72 FJ40, '05 Passat TDI-DD.
"It is the first responsibility of every citizen to question authority." "A republic, if you can keep it". Benjamin Franklin 1706-1790
"The problem with socialism is that eventually you run out of other people's money [to spend]." Margaret Thatcher 1925-2013
Reply With Quote
  #5  
Old 01-19-2013, 08:52 AM
rover67's Avatar
rover67 rover67 is offline
Rising Sun Member
 
Join Date: Nov 2007
Location: Boulder, Co
Posts: 5,145
Default

I bet one of the ones I made for the H55 would work like dan says.
__________________
Marco Capote
KDGWX
85 FJ60
82 FJ40
Reply With Quote
  #6  
Old 01-19-2013, 10:16 AM
nattybumppo's Avatar
nattybumppo nattybumppo is offline
Rising Sun Secretary
 
Join Date: Nov 2009
Location: Northwest Denver
Posts: 1,115
Default

Quote:
Originally Posted by Old40Dog View Post
Just put an H55 in it....you won't be disappointed!
Yeah but that's a pretty big project! Although very tempting.
__________________
Sascha Steinway TLCA # 20217
1977 FJ40 "Ripper" (because it shreds!) (What is a "shread"...Steve Crase)
1988 FJ62 "Dino" OME, now in the hands of my daughter
2013 F-150 "Black Ops"
Reply With Quote
  #7  
Old 01-19-2013, 10:18 AM
nattybumppo's Avatar
nattybumppo nattybumppo is offline
Rising Sun Secretary
 
Join Date: Nov 2009
Location: Northwest Denver
Posts: 1,115
Default

Quote:
Originally Posted by rover67 View Post
I bet one of the ones I made for the H55 would work like dan says.
Thanks, Marco. I asked Dan to check the reach. I bet it will work too. Seems like the output shaft on the 55 is longer, if anything. So can I use it if I can pry it from Dan's fingers?
__________________
Sascha Steinway TLCA # 20217
1977 FJ40 "Ripper" (because it shreds!) (What is a "shread"...Steve Crase)
1988 FJ62 "Dino" OME, now in the hands of my daughter
2013 F-150 "Black Ops"
Reply With Quote
  #8  
Old 01-19-2013, 11:16 AM
rover67's Avatar
rover67 rover67 is offline
Rising Sun Member
 
Join Date: Nov 2007
Location: Boulder, Co
Posts: 5,145
Default

Quote:
Originally Posted by nattybumppo View Post
Thanks, Marco. I asked Dan to check the reach. I bet it will work too. Seems like the output shaft on the 55 is longer, if anything. So can I use it if I can pry it from Dan's fingers?
absolutely!

there are quite a few pieces to the whole puller kit so just keep it all together even if you just need to borrow one part. hopefully that'll keep stuff from going missing.
__________________
Marco Capote
KDGWX
85 FJ60
82 FJ40
Reply With Quote
  #9  
Old 01-19-2013, 06:10 PM
DanS's Avatar
DanS DanS is offline
Rising Sun Member
 
Join Date: Jul 2010
Location: Idaho Springs
Posts: 412
Default

Quote:
Originally Posted by rover67 View Post
absolutely!

there are quite a few pieces to the whole puller kit so just keep it all together even if you just need to borrow one part. hopefully that'll keep stuff from going missing.
Will do for sure. In fact, my suggestion is that we have a transmission party, because lord knows I haven't gotten off my butt to simply swap that input shaft yet, so that I can get the whole shebang back to you.

Dan
Reply With Quote
  #10  
Old 09-18-2013, 08:53 PM
Vae Victus Vae Victus is offline
Rock Stacker
 
Join Date: Sep 2013
Location: Nashville, TN
Posts: 1
Default

Quote:
Originally Posted by rover67 View Post
absolutely!

there are quite a few pieces to the whole puller kit so just keep it all together even if you just need to borrow one part. hopefully that'll keep stuff from going missing.
Hey guys, new to the forum but I'm a regular over on iH8Mud. I'm at that point... You know, that point where everyone gets stuck on the H42 rebuild where you have to pull that bearing. Rebuilding my 1976 FJ40 - a frame off I guess (can't seem to stop taking things off).

I saw that you guys have a puller floating around and that you might be lettin' your Tennessee cousins borrow it? Or even pay to borrow it?

I'm either going to have to build my own, or get really lucky and borrow one that someone has.

Please let me know.

Here's my H42 rebuild thread documentation for future suckers like me: http://forum.ih8mud.com/40-55-series...76-fj40-2.html

Vae
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -6. The time now is 09:11 PM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.