Rising Sun Member Forums  

Go Back   Rising Sun Member Forums > For Sale + Help > For Sale / Wanted

Reply
 
Thread Tools
  #1  
Old 09-03-2013, 02:07 PM
cocruiser62 cocruiser62 is offline
Rock Stacker
 
Join Date: Aug 2013
Location: Boulder
Posts: 21
Default Still hoping to find a 60/62 Drivers Fender

Hi everyone,
Rover67 helped me out with the passenger side. So now I'm super motivated to get the driver's side and get the body work under way. Any help or referrals is appreciated. Desperately hoping not to have to order one.
Thanks again!
Dave
Reply With Quote
  #2  
Old 09-03-2013, 06:41 PM
RedCreeper's Avatar
RedCreeper RedCreeper is offline
Hard Core 4+
 
Join Date: May 2008
Location: Firestone, CO
Posts: 897
Send a message via AIM to RedCreeper
Default

look a few posts down.
__________________
Kenny Jones
TLCA #19056
08 TT FJC
82 Scrambler (Scraps)
81 Scrambler (Sassy)
07.5 Dodge Ram 2500
69 Maro... next project when the Jeeps get done.....
Reply With Quote
  #3  
Old 09-03-2013, 06:55 PM
cocruiser62 cocruiser62 is offline
Rock Stacker
 
Join Date: Aug 2013
Location: Boulder
Posts: 21
Default

Thanks Kenny. I did. FJ Mark's post was from Nov 2012. It showed up high today because I replied to it. Mark responded that the fender was gone so I created my post from today.
Appreciate everyone's help.
Dave
Reply With Quote
  #4  
Old 09-03-2013, 08:35 PM
Art Volmer's Avatar
Art Volmer Art Volmer is offline
Cruise Moab Committee
 
Join Date: Jan 2007
Location: Denver
Posts: 279
Default

pm sent
Reply With Quote
  #5  
Old 10-25-2013, 09:29 AM
cocruiser62 cocruiser62 is offline
Rock Stacker
 
Join Date: Aug 2013
Location: Boulder
Posts: 21
Default Ping - Still looking for good shape drivers fender 60/62

Hi everyone,
Still looking for a good shape drivers fender 60/62.
Appreciate it.
DS
Reply With Quote
  #6  
Old 10-25-2013, 07:22 PM
DanS's Avatar
DanS DanS is offline
Rising Sun Member
 
Join Date: Jul 2010
Location: Idaho Springs
Posts: 487
Default

Quote:
Originally Posted by cocruiser62 View Post
Hi everyone,
Still looking for a good shape drivers fender 60/62.
Appreciate it.
DS
How quickly are you needing one?

I'm likely to have one, in a while.

Note: before I get to having a spare, I've got to swap an engine into Dad's 60, rebuild (or replace the IP) on a 1HZ, and then install it into my 60.

So, realistically sometime next spring/summer before I can start parting out the body of the Guzzler...

Dan
Reply With Quote
  #7  
Old 10-26-2013, 07:19 AM
cocruiser62 cocruiser62 is offline
Rock Stacker
 
Join Date: Aug 2013
Location: Boulder
Posts: 21
Default

Hi Dan,
I'm probably in a bit more of a hurry than that, but please keep me in mind when the time comes. I'd like to find one sooner, but being realistic about that -- and very much avoiding paying the ticket to get an SOR replacement delivered. Thanks! Dave
Reply With Quote
  #8  
Old 10-26-2013, 07:26 PM
DanS's Avatar
DanS DanS is offline
Rising Sun Member
 
Join Date: Jul 2010
Location: Idaho Springs
Posts: 487
Default

Quote:
Originally Posted by cocruiser62 View Post
Hi Dan,
I'm probably in a bit more of a hurry than that, but please keep me in mind when the time comes. I'd like to find one sooner, but being realistic about that -- and very much avoiding paying the ticket to get an SOR replacement delivered. Thanks! Dave
You got it.

At least now you know there's one that will be available sometime in the almost near future.

Dan
Reply With Quote
  #9  
Old 11-25-2013, 12:30 AM
DanS's Avatar
DanS DanS is offline
Rising Sun Member
 
Join Date: Jul 2010
Location: Idaho Springs
Posts: 487
Default

Just a quick follow up for you DS:

In Ft. Collins there's a 62 being parted out that had what looked like a good driver side front fender (warning: it was dark, and it wasn't the focus of my attention).

Here's the thread on iH8MUD: http://forum.ih8mud.com/parting-out/...8-fj62-co.html

Dan
Reply With Quote
  #10  
Old 11-26-2013, 06:38 AM
cocruiser62 cocruiser62 is offline
Rock Stacker
 
Join Date: Aug 2013
Location: Boulder
Posts: 21
Default

I'll check it out! Thanks Dan. Really appreciate the tip.
DS
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On


All times are GMT -6. The time now is 07:56 AM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.