Rising Sun Member Forums  

Go Back   Rising Sun Member Forums > Toyota 4x4 > General Tech Forum

Reply
 
Thread Tools
  #1  
Old 05-09-2007, 10:47 AM
DaveInDenver's Avatar
DaveInDenver DaveInDenver is offline
Hard Core 4+
 
Join Date: Jun 2006
Location: Larimer County
Posts: 6,613
Default Air Locker fitting

Anyone know where (or if) I can get this part of the bulkhead fitting? This is the little part where the tube from inside the diff comes together with the blue hose. BTW, this little part is no match for the diff housing-to-garage floor impact when your front diff assembly rolls off your jack as you're trying wrestle it into place...
__________________
'91 Toyota Pickup
'09 Kawasaki KLR650
'12 Gunnar Rockhound 29

"To live is to suffer, to survive is to find some meaning in the suffering." -- Friedrich Nietzsche

Last edited by DaveInDenver; 08-26-2010 at 10:17 AM.
Reply With Quote
  #2  
Old 05-09-2007, 11:04 AM
Red_Chili's Avatar
Red_Chili Red_Chili is offline
Hard Core 4+
 
Join Date: Aug 2005
Location: Littleton CO
Posts: 8,409
Default

I believe A&A Tradin' Post may have it. Should be NPT and compression fitting sizes. No kiddin'!

If not, TRBurris@ARBUSA.com should be able to fix you up.
(206) 264-1669
__________________
-Bill Morgan
Heb Dduw, heb ddim; Duw a digon
Abnormally aspirated
KDěRCH
Bio Page
I'm that gun-totin', farm-raised, evangelical, pro-environment, OHV ridin'/drivin', Southern civil rights pro-labor Liberal yo' momma told you couldn't possibly exist.
Reply With Quote
  #3  
Old 05-09-2007, 11:42 AM
nuclearlemon's Avatar
nuclearlemon nuclearlemon is offline
Hard Core 4+
 
Join Date: Aug 2005
Location: denver
Posts: 5,752
Default

arb uses odd sizes so i retapped mine to take 1/4" air lines/1/8 npt
__________________
ige tlca #1431
Reply With Quote
  #4  
Old 05-09-2007, 12:38 PM
Man Jerk Man Jerk is offline
Trail Ready
 
Join Date: Sep 2005
Location: Co Spngs
Posts: 348
Default

You could always call Steve Cramer (Poser on ih8mud). I'm sure he's got them in stock.

www.lcr4wd.com
__________________
Mark Janzen
Member of:
http://www.mntoyx4.com
http://www.coloradolandcruisers.org

86 4runner
Reply With Quote
  #5  
Old 05-09-2007, 02:00 PM
Three Wheel Ben's Avatar
Three Wheel Ben Three Wheel Ben is offline
Rising Sun Member
 
Join Date: Sep 2005
Location: Centennial
Posts: 410
Default

Marlin sells them, not local though.

Quote:
Originally Posted by DaveInDenver View Post
FWIW, my email to this address was bounced and the area code for ARB USA is now (425). I am going to call tech support at ARB and just ask them.
__________________
KC0ZBI
85 4Runner, 1UZ in process
Reply With Quote
  #6  
Old 05-09-2007, 02:40 PM
Red_Chili's Avatar
Red_Chili Red_Chili is offline
Hard Core 4+
 
Join Date: Aug 2005
Location: Littleton CO
Posts: 8,409
Default

Quote:
Originally Posted by DaveInDenver View Post
FWIW, my email to this address was bounced and the area code for ARB USA is now (425). I am going to call tech support at ARB and just ask them.
Thanks for that. I got the contact info from an article I wrote on 4x4wire.com for Project Blackbean.

I guess no career is permanent! Parts should be easy to get from them, never had a problem.
__________________
-Bill Morgan
Heb Dduw, heb ddim; Duw a digon
Abnormally aspirated
KDěRCH
Bio Page
I'm that gun-totin', farm-raised, evangelical, pro-environment, OHV ridin'/drivin', Southern civil rights pro-labor Liberal yo' momma told you couldn't possibly exist.
Reply With Quote
  #7  
Old 05-10-2007, 03:51 AM
AxleIke's Avatar
AxleIke AxleIke is offline
Rising Sun Member
 
Join Date: Apr 2006
Location: Arvada, CO
Posts: 3,422
Default

McGuckins hardware in boulder. I messed up one of my fittings, went down there, got it out of a bin. Also built my pressure tester that way.
__________________
Isaac

Baby Beast 2- 1999 4Runner SR5

Baby Beast -1987 4Runner SR5-Gone, but not forgotten

Generation Dead
Reply With Quote
  #8  
Old 05-10-2007, 06:28 AM
60wag's Avatar
60wag 60wag is offline
Rising Sun Member
 
Join Date: Aug 2005
Posts: 1,814
Default

It might be BSP (British Standard Pipe) thread rather than the usual NPT. I ran into that on the solenoid manifold on the ARB compressor.
__________________
Bruce
'96FZJ80
'03 KTM 450EXC
"If you know what you're doing, then you aren't learning anything." - A. Lincoln
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -6. The time now is 02:20 PM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.