#1




Dipole vs. Vertical?
In the 3rd HAM class, we discussed these two antennas, and the formulas of both.
For a Dipole, the formula was: Length (in feet)= 468 / Frequency in MhZ. That length was then divided in half, and that gave you how long your "legs" of the Dipole should be. For the Vertical, the formulas was: Length (in feet)= 234 / Frequency in MhZ. The 234 is just half of 468, indicating what we learned that a Vertical is just half of a Dipole stood on its end. For a 1/4λ vertical on 2M, the length wil be around 20". Someone (I think it was Scott) asked after we figured this out why he didn't see too many 20" antennas on anyones rig, but my antenna (the homebrew 2M) and Bruce's seemed much longer. I didn't have an answer for it then, but I do now. We have the 2M, 5/8λ vertical on our rigs. For us to understand this, lets figure it out. Take for example the RS adopted simplex frequency of 146.460MhZ. To figure out the multiplier in the 5/8λ formula, we take the 1/2λ number of 468 and multiply by 2 (to figure out the 1/1λ number). 468 * 2 = 936. Divide the 1/1λ by 8 (because the divisor in the 5/8 antenna is 8) , then multiply by 5 (because the multiplier is 5) and you get: 936 / 8 = 117 117 * 5 = 585. Put 585 into out formula: Length (in feet)= 585 / Frequency in MhZ and for 146.460MhZ we get: 585 / 146.460 = 3.994 FEET, = 47.93 INCHES So for the 5/8λ antenna at 146.460MhZ, the optimum length of the whip should be 47.93 inches. Mine is 48 inches. Hopefully that helps.
__________________
Choose Wisely Blue '99 UZJ100 2" Lift, Replicated Outback stackable drawer system, Engle 63 QT, Custom Front Bumper, Gamiviti Shorty roofrack. 
#2




But there are some people who run 1/4λ antennas, which would be around 19" tall. But also, as on CB, a 5/8λ antenna generally works better, thus the 4' 2m antenna. Can you wrap the conducting surface as they do with CB antennas? A 5/8λ CB antenna should be around 258 inches (21.5 feet) long, yet they shrink it into a 4' whip. I suppose you give up a lot of RF transfer by doing that...
__________________
Matt Miller TLCA# 13684 Rising Sun Bio 1977 FJ40 2F "Brahma" + Lockright, tach, Warn 8274, FJ60 Power Steering, no more Sanden OBA (factory emissions) 1996 FZJ80 1FZFE factory lockers + Safari intercooled turbo, CDL switch, cup holder, Metric TLC leather, heated seats and JDM switches 2000 Tundra Limited TRD 2UZFE SOLD Last edited by subzali; 02282008 at 04:47 PM. Reason: My bad, good thing Nathaniel has his eye on me... 
#3




Quote:
BTW, my shortie antenna is 1/4 on 2m and it's 19" tall. It's a NMO2/70SH, short thing with a spring and big coil in the middle. It's low profile (looks sorta like a cell antenna) and so it doesn't attract attention in the city and doesn't hang up on stuff on the trail since it's in the middle of my roof.
__________________
'08 Tacoma TRD  Donna 
#4




Ground plane, 1/2 dipole antenna idea...
...so I think it was Dave that gave me the idea after class, but I've got an idea for increasing antenna performance on my extra cab Tacoma.
Since I have a Canbak topper, would adding a layer of copper mesh to the underside of the fabric be a significant improvement to the "mirror" surface, then just the roof of the cab? I found a couple sources of mesh wire online, and would need to select the ideal mesh size/wire size combination. This is what I'm considering; http://www.twpinc.com/twpinc/control...B811FA624.jvm1 It is advertised as RF shielding, so I expect it would act like the needed reflector surface? 72" wide fabric would work, then I'll figure out how best to bond it to the underside of the Sunbrella fabric. Any thoughts? 
#5




This seems like a pretty good write up on Vehicle Bonding, and includes some homemade methods of making bonding straps.
http://www.k0bg.com/bonding.html 
#6




Quote:
Before the test I wanted to make sure you got the math correct for this idea. It is close, but off just enough. From our example, the multiplier for 5/8λ is 585. The low end frequency in MhZ for CB (11 meter) is 26.965 MhZ, the high end is 27.405 MhZ. Then, we find the length in feet = 585 / 27.405 which is 21.35 Feet. For the other end, we find that the length in feet = 585 / 26.965 which is 21.69 Feet. So for CB, the length of the whip of a 5/8λ vertical antenna needs to be between 256.2 inches and 260.3 inches long. By my calculations, if you were using the 585 multiplier you were assuming that the CB frequency was in the middle of the 10 Meter HAM band (28.00029.700 MhZ). L = 585 / 28.53 MhZ. L = 20.5 feet. Did you use the 585 multiplier? Did you use 28.530 Mhz?
__________________
Choose Wisely Blue '99 UZJ100 2" Lift, Replicated Outback stackable drawer system, Engle 63 QT, Custom Front Bumper, Gamiviti Shorty roofrack. 
#7




Quote:
Alan is extremely knowledgable in this arena. I reccomend using his site for all types of mobile questions and direction. Everyone needs to read his points on magmount antennas.
__________________
Choose Wisely Blue '99 UZJ100 2" Lift, Replicated Outback stackable drawer system, Engle 63 QT, Custom Front Bumper, Gamiviti Shorty roofrack. 
#8




Yeah I was confused, thought CB was in the 10m band
__________________
Matt Miller TLCA# 13684 Rising Sun Bio 1977 FJ40 2F "Brahma" + Lockright, tach, Warn 8274, FJ60 Power Steering, no more Sanden OBA (factory emissions) 1996 FZJ80 1FZFE factory lockers + Safari intercooled turbo, CDL switch, cup holder, Metric TLC leather, heated seats and JDM switches 2000 Tundra Limited TRD 2UZFE SOLD 
Thread Tools  

