Rising Sun Member Forums  

Go Back   Rising Sun Member Forums > Toyota 4x4 > General Tech Forum

View Poll Results: Which color of threadlock?
Red 4 100.00%
Blue 0 0%
Voters: 4. You may not vote on this poll

Reply
 
Thread Tools
  #1  
Old 10-29-2008, 09:25 PM
theboomboom's Avatar
theboomboom theboomboom is offline
Rising Sun Member
 
Join Date: Dec 2007
Location: Centennial
Posts: 443
Send a message via MSN to theboomboom
Default Red vs. Blue

Hey all, here's my situation.

The bronco has been wanting to spit out its driveshaft lately. The last work done to it was a clutch replacement a few thousand miles ago, and in the past few hundred miles i noticed a vibration in the drivetrain. Hop under the rig, and I'm able to spin the driveshaft bolts with my finger . I cinched everything back up, under the assumption that they had not been torqued by the guy that did the clutch. A couple hundred more miles, and I'm experiencing similar symptoms. Re-check everything, and sure enough, they were loose again. Now I'm at a crossroads. There are no locking washers, or any other hardware to keep it from happening again. I plan on contacting a tech from one of the dealers nearby to find out if it needs some locking hardware. In addition to the hardware, I plan on using some threadlock. The poll at the top is whether I should use the blue, or heavy duty red. The truck has ~121k, basically stock, it's been routinely maintained, but there could be a lift in its future. Obviously, I don't want to fuss with the driveshaft bolts again untiil then, so I'm leaning towards the red. When/if it gets lifted, is it really the end of the world to try and free those bolts? Is the blue adequate in the interim?

Thanks
__________________
Rick Maestas
KD0CGE

1997 T100 4x4
Reply With Quote
  #2  
Old 10-29-2008, 09:44 PM
nuclearlemon's Avatar
nuclearlemon nuclearlemon is offline
Hard Core 4+
 
Join Date: Aug 2005
Location: denver
Posts: 5,696
Default

i'm a big fan of red.
__________________
ige tlca #1431
Reply With Quote
  #3  
Old 11-11-2008, 05:16 PM
SteveH SteveH is offline
Hard Core 4+
 
Join Date: Aug 2006
Location: Colo Springs
Posts: 1,275
Default

I'd use red - blue (esp. on older/greasier stuff) doesn't hold all that well. If the bolt threads are badly worn, replace the bolts themselves.
Reply With Quote
  #4  
Old 11-12-2008, 10:52 AM
Red_Chili's Avatar
Red_Chili Red_Chili is offline
Hard Core 4+
 
Join Date: Aug 2005
Location: Littleton CO
Posts: 8,409
Default

On drivelines, always use red.
__________________
-Bill Morgan
Heb Dduw, heb ddim; Duw a digon
Abnormally aspirated
KDěRCH
Bio Page
I'm that gun-totin', farm-raised, evangelical, pro-environment, OHV ridin'/drivin', Southern civil rights pro-labor Liberal yo' momma told you couldn't possibly exist.
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -6. The time now is 04:20 AM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.