Rising Sun Member Forums  

Go Back   Rising Sun Member Forums > For Sale + Help > For Sale / Wanted

Reply
 
Thread Tools
  #1  
Old 10-13-2017, 08:13 AM
scheefdog scheefdog is offline
Wincher
 
Join Date: Oct 2014
Location: Golden
Posts: 65
Default Hypertherm Powermax 30 AIR - like new

Up for sale is a Hypertherm Powermax 30 Air plasma cutter that I purchased new about a year ago. It is a very nice plasma cutter with built-in air supply (no need for a separate compressor). Can be plugged into 110 or 220 and is very portable because it has its own air supply. The machine has seen very little use and is in perfect condition - I take care of my tools.



Rated capacity is cutting 3/8" plate and will severe 5/8". I have cut mostly 16ga to 3/16" and it cuts like butter. At the bottom are some pictures of how cleanly it cuts with precision. I have the manual and everything that came new with it.



I am selling because I am looking to go big and buy a cnc plasma table setup. I am in Golden, but drive to Gunnison frequently and could drop it along the way.



$1,350




Link to the Hypertherm's website:

https://www.hypertherm.com/en-US/hyp...r/?region=NART



IMG_0539 by tscheef



IMG_0538 by tscheef, on Flickr

IMG_0542 by tscheef, on Flickr



IMG_0540 by tscheef, on Flickr

IMG_7485 by tscheef, on Flickr

IMG_7486 by tscheef, on Flickr

[url=https://flic.kr/p/Z1cZub]
__________________
Travis
Present:
2006 Tundra DC w/ 34s & 4.56 gears, Homebrew Camper
2005 Tundra - work truck
1996 4runner - in progress

Past:
1988 Pickup w/ 3.4 swap
1979 Pickup w/ 20r hybrid and full re-build
2002 Tundra
1999 Tacoma
1992 Xtracab 22re

Last edited by scheefdog; 10-14-2017 at 01:04 PM.
Reply With Quote
  #2  
Old 10-13-2017, 09:09 AM
DaveInDenver's Avatar
DaveInDenver DaveInDenver is offline
Hard Core 4+
 
Join Date: Jun 2006
Location: Larimer County
Posts: 8,328
Default

This is a nice plasma cutter. I'd be interested but I'm saving for a plasma table eventually, too. So I think it's just more than I would want to tie up in the interim unfortunately.

BTW, if someone is interested and doesn't get in on the one Travis is selling, you can buy new ones from the Hypertherm website for not a ton more.

GLWS!
__________________
'91 Pickup - Imelda
'08 Tacoma TRD - Donna

"Hey Macarena!" -- Thomas Jefferson
Reply With Quote
  #3  
Old 10-13-2017, 08:31 PM
scheefdog scheefdog is offline
Wincher
 
Join Date: Oct 2014
Location: Golden
Posts: 65
Default

Quote:
Originally Posted by DaveInDenver View Post
This is a nice plasma cutter. I'd be interested but I'm saving for a plasma table eventually, too. So I think it's just more than I would want to tie up in the interim unfortunately.

BTW, if someone is interested and doesn't get in on the one Travis is selling, you can buy new ones from the Hypertherm website for not a ton more.

GLWS!


Dave - Is that your polite way of telling me I'm asking too much?

Looks like the price has changed since I bought it. Updated price to $1350.
__________________
Travis
Present:
2006 Tundra DC w/ 34s & 4.56 gears, Homebrew Camper
2005 Tundra - work truck
1996 4runner - in progress

Past:
1988 Pickup w/ 3.4 swap
1979 Pickup w/ 20r hybrid and full re-build
2002 Tundra
1999 Tacoma
1992 Xtracab 22re

Last edited by scheefdog; 10-14-2017 at 01:04 PM.
Reply With Quote
  #4  
Old 10-13-2017, 09:12 PM
DaveInDenver's Avatar
DaveInDenver DaveInDenver is offline
Hard Core 4+
 
Join Date: Jun 2006
Location: Larimer County
Posts: 8,328
Default

I didn't think your price was too high. It looks like it could be brand new in the photos.
__________________
'91 Pickup - Imelda
'08 Tacoma TRD - Donna

"Hey Macarena!" -- Thomas Jefferson
Reply With Quote
  #5  
Old Today, 10:06 AM
Dirt Claude Dirt Claude is offline
Lifted
 
Join Date: Mar 2012
Location: Castle Rock
Posts: 125
Default

I'm interested Travis, PM on the way.
__________________
Brad Cockrell
72' FJ40
00' 100
01' Taco
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On


All times are GMT -6. The time now is 09:56 PM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.