Rising Sun Member Forums  

Go Back   Rising Sun Member Forums > For Sale + Help > Vendor Market Place

Reply
 
Thread Tools
  #1  
Old 09-12-2009, 08:07 PM
powderpig's Avatar
powderpig powderpig is offline
Hard Core 4+
 
Join Date: Aug 2005
Posts: 1,352
Default Adventure Offroad

So some people know that I do good work and some do not in the club. Anyhow I have been working on Cruisers and trucks(Toyota products) for a number of years. Talk to me about the best location for working on your Cruiser. I can use your parts or supply parts.
I can also work on other vehicles(domestic and other makes). I was a diesel mechanic in the 80's. I did flat rate car work for a couple of years as well( a recession a ways back). I do prefer to work on Toyota's. But no challenge is too small.
Either PM me, or Call me 303-884-7813
All said and done I have been wrenching since 1980( 29 years and counting).
I also do Driver training if you need. I am certified I4WDTA trainer. If you feel the need to get more educated in this area.
Robbie

Last edited by powderpig; 04-13-2010 at 07:45 AM.
Reply With Quote
  #2  
Old 09-12-2009, 10:25 PM
AxleIke's Avatar
AxleIke AxleIke is offline
Rising Sun Member
 
Join Date: Apr 2006
Location: Arvada, CO
Posts: 3,422
Default

I can attest to the quality of Robbie's work. You will not find a better mechanic to work on your junk, period. I'd go to Robbie long before going to anyone else.
__________________
Isaac

Baby Beast 2- 1999 4Runner SR5

Baby Beast -1987 4Runner SR5-Gone, but not forgotten

Generation Dead
Reply With Quote
  #3  
Old 09-13-2009, 09:07 AM
Uncle Ben's Avatar
Uncle Ben Uncle Ben is offline
Rising Sun Member
 
Join Date: Aug 2005
Location: Louisville, Colorado
Posts: 13,168
Send a message via AIM to Uncle Ben
Default

Everyone knows I do all my own work. I have farmed a couple things out to Robbie as he is the ONLY other person I will trust my junk with! Get it done right the first time and give Robbie a cal!
__________________
KØUBN
Kevin
TLCA #3007
Northside!

Colorado Trail Patrol
Stay on the Trail!
I'm the God-fearing, gun-toting, American flag-waving, conservative you were warned about!
Quote:
Originally Posted by AxleIke View Post
I need an FJ40....
Quote:
Originally Posted by Red_Chili View Post
Cruisers are superior
Reply With Quote
  #4  
Old 09-14-2009, 12:49 PM
Hulk's Avatar
Hulk Hulk is offline
Cruise Moab Committee
 
Join Date: Aug 2005
Location: South Side!
Posts: 11,492
Send a message via AIM to Hulk
Default

Robbie was worked on my 80 and the results were outstanding!
__________________
Matt Farr, Centennial, Colorado | Webmaster: TLCA.org
1996 FZJ80 · TLCA #4189 · WØRDY
www.rustybrain.com/cruisers · my Rising Sun bio · Facebook · Twitter · Need satellite Internet? Check out: Exede Internet

If you think you can or think you can't, you're right.
Reply With Quote
  #5  
Old 09-14-2009, 01:21 PM
Romer's Avatar
Romer Romer is offline
Rising Sun Member
 
Join Date: Aug 2005
Location: Englewood, Colorado
Posts: 7,171
Default

Quote:
Originally Posted by Hulk View Post
Robbie was worked on my 80 and the results were outstanding!

X2 in fact he has worked on both our 80's. He has done the Haedgasket on my 80, helped retrofit Sarah's truck for Lockers (was lockerless), done axle jobs, rebuilt a differential and provided a general tune-up and fluid change-out prior to Sarah going to college.
__________________
Ken Romer - K0ROM
04 UZJ100
77 FJ40
11 RX350
02 Kimberley Kamper

Reply With Quote
  #6  
Old 09-23-2009, 06:24 PM
FJBRADY's Avatar
FJBRADY FJBRADY is offline
Rising Sun Member
 
Join Date: Oct 2008
Location: Highlands Ranch
Posts: 2,061
Default

Thanks, Robbie!!!

I just had Robbie do a 30K service to the FJC and I am sold on his work and his knowledge of the vehicle.....and he was a fraction of what others charge. I also had him give the 40 a once over and will schedule work with him soon after the 40 is decommissioned for the winter.

Thanks again....................
__________________
Steve Brady
TLCA # 19524
KD0JVZ

97 LX450
Reply With Quote
  #7  
Old 05-26-2010, 04:00 PM
treerootCO's Avatar
treerootCO treerootCO is online now
Rising Sun Member
 
Join Date: Aug 2005
Posts: 4,569
Send a message via AIM to treerootCO
Default

Just got done replacing my fuel filter on the 80. No matter if you have done one before or not, you should pay Robbie to do it . I hear he can swap one in 15min. It took me well over two days
__________________
aka Mike D.----->Bio Page KDøGWY
“He who goes unarmed in paradise had better be sure that that is where he is.”—James Thurber
"Its better to be thought a fool rather than to speak up and remove all doubt." - Lincoln
pride is ego, the word I had lost was dignity. The quality or state of being worthy of esteem or respect.
Ptarmigan build thread - 95FZJ80
www.root45.com
www.risingsun4x4club.org

TLCA #14133

Reply With Quote
  #8  
Old 05-28-2010, 02:17 PM
CardinalFJ60's Avatar
CardinalFJ60 CardinalFJ60 is offline
Rising Sun Member
 
Join Date: Aug 2005
Location: Lafayette
Posts: 1,599
Default definitely get with Robbie!

I'm lucky enough to have had Robbie do a REEEAAALLLLLY nice re-build on my 2f in the 60. as has been said before...
Reply With Quote
  #9  
Old 09-15-2011, 09:57 AM
powderpig's Avatar
powderpig powderpig is offline
Hard Core 4+
 
Join Date: Aug 2005
Posts: 1,352
Default

New location for the winter. The building is coming along slowly.

I am located at 2752 47th st, boulder co 80302.

Just up the block from Boulder, Toyota off of Foothills park way.


Just some space, no lift. But it will be warm and dry for the winter as Robin and I get work done on the house and the garage.
Reply With Quote
  #10  
Old 09-15-2011, 05:23 PM
Jacket's Avatar
Jacket Jacket is offline
Rising Sun Member
 
Join Date: Feb 2007
Location: Lafayette
Posts: 4,118
Default

What about a couch and a fridge?

Good news!
__________________
- Matt
1976 FJ40 - green and mostly stock
1996 FZJ80 - not so stock
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -6. The time now is 10:42 AM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.