Rising Sun Member Forums  

Go Back   Rising Sun Member Forums > Toyota 4x4 > General Tech Forum

Reply
 
Thread Tools
  #1  
Old 07-20-2014, 01:09 AM
Get Outside's Avatar
Get Outside Get Outside is offline
Rising Sun Member
 
Join Date: Aug 2013
Location: Central Coast, CA
Posts: 121
Default How did you route your roof light harness?

Hey guys, I was out working on the truck and scratching my head thinking on how I'm going to route my light bar harness up to the 100 roof!

Those of you who have done it, any helpful pics and/or suggestions?
Thanks
__________________
Paulo Teixeira

TLCA #22380

'74 40 series (home brewed center and dash boxes)

'06 100 series (Gamiviti half rack {thanks Tim}, home brewed roof basket, rear drawers on the works)
Reply With Quote
  #2  
Old 07-20-2014, 09:40 PM
nakman's Avatar
nakman nakman is offline
Rising Sun Commander
 
Join Date: Aug 2005
Location: north side
Posts: 9,977
Default

IN front I went out the back of the hood crack, then up under the snorkel. You can also run next to the windshield, use 3/8" split loom and it'll just shove in that crack next to the windshield.

In back I ran the wires underneath the truck, then they go up inside the fender, inside the tailgate opening, and inside the hatch.. all zip tied to the stock latches, finally the loom pokes out the top of the rear hatch.

No drilling required..
__________________
99 uzj100, 05 525EXC

www.gamiviti.com

Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -6. The time now is 06:37 AM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.