Rising Sun Member Forums  

Go Back   Rising Sun Member Forums > Toyota 4x4 > General Tech Forum

Reply
 
Thread Tools
  #1  
Old 05-11-2012, 07:43 PM
baja1d's Avatar
baja1d baja1d is offline
Hard Core 4+
 
Join Date: May 2010
Location: Littleton, CO
Posts: 1,436
Default 1986 2F into a '64 Throttle Cable Question

Posted this on Mud but thought I ask here as well:


I'm putting an '86 2F into my '64 and have run into some trouble with the Carb Linkage. I'd like to use a throttle cable like these:

http://www.summitracing.com/parts/LOK-TC-1000U/

but have know idea which adapters or length I need. From my searches it seems like most use these on their 350 swaps. Has anybody used these on a stock 2F? If so, can you provide me with pictures, part numbers, or a common kit? Thanks in advance.
__________________
Travis
TLCA#: 22078
1994 FJ80
1964 FJ40
1988 4Runner
Reply With Quote
  #2  
Old 05-12-2012, 10:51 PM
SteveH SteveH is offline
Hard Core 4+
 
Join Date: Aug 2006
Location: Colo Springs
Posts: 1,288
Default

Putting an '83 2F into a '65 FJ45, I used a 1st gen 4Runner throttle cable. I had to cut the cable and housing shorter, but the cable had the correct nipple end to fit the gas pedal, and the other end I somehow fabbed to fit the carb linkage (I don't recall how). Anyway, the cable assembly was only a few bucks at the junkyard. Might be worth checking this out for starters.
__________________
Steve H.
Colo Springs, CO
Reply With Quote
  #3  
Old 05-13-2012, 08:18 AM
baja1d's Avatar
baja1d baja1d is offline
Hard Core 4+
 
Join Date: May 2010
Location: Littleton, CO
Posts: 1,436
Default

Thanks Steve, I'll look into this setup
__________________
Travis
TLCA#: 22078
1994 FJ80
1964 FJ40
1988 4Runner
Reply With Quote
  #4  
Old 05-15-2012, 10:06 AM
Kipper's Avatar
Kipper Kipper is offline
Administrator
 
Join Date: Aug 2005
Location: Arvada
Posts: 640
Default

Quote:
Originally Posted by baja1d View Post
Posted this on Mud but thought I ask here as well:


I'm putting an '86 2F into my '64 and have run into some trouble with the Carb Linkage. I'd like to use a throttle cable like these:

http://www.summitracing.com/parts/LOK-TC-1000U/

but have know idea which adapters or length I need. From my searches it seems like most use these on their 350 swaps. Has anybody used these on a stock 2F? If so, can you provide me with pictures, part numbers, or a common kit? Thanks in advance.
I bought one of these and it's a good length because it's long enough to give some options on how you mount it to the carb:

http://www.ebay.com/itm/UNIVERSAL-TH...#ht_576wt_1163


I have a '66 with a '78 2F in it. I used a later model pedal and drilled a hole in the firewall to mount one end to the pedal. and built a white trash ('cause that's how I roll) adapter bracket that bolts to the base of the carb to mount the cable. Seems to work OK sitting in the garage, but I won't know until next week when I get everything finished up and cruise it around the block. It's all currently disassembled while I put a carb rebuild kit in, but once it's all together I can send you some pics. Or stop by any night next week Mon-Fri, family is out of town all week so

Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -6. The time now is 12:03 PM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.