Rising Sun Member Forums  

Go Back   Rising Sun Member Forums > For Sale + Help > For Sale / Wanted

Reply
 
Thread Tools
  #1  
Old 01-29-2014, 04:14 PM
TonkaToy's Avatar
TonkaToy TonkaToy is offline
Rising Sun Member
 
Join Date: Jul 2010
Location: Thornton, Colorado
Posts: 175
Default F engine and goodies

I have a complete F engine I am looking to find a home for. The rear main seal was leaking and that caused the pilot bearing to bind up/squeal. but, other than that, it ran great when pulled...and, ironically, I have a new rear main seal for it.
It's a compete unit, 3spd trans and PTO included.
It does have a 'Jim C' carb on it and I have a stock carb as well.
Header and complete exhaust also available and rust free.
Non factory PTO winch and shaft. I also have the hard to find little PTO stick 'gate' for it.
Radiator is available too. It may need to be sealed, it was seeping at the top 'cap' when I pulled it.
Complete front heater set up, from core to fan. I am replacing it with a new Vintage Air unit.
Stock, non power, steering gear - from rag joint to pitman.

Prices negotiable, tell me what you need and let's make a deal.
If you want pictures of anything, let me know too.

Thanks!
Reply With Quote
  #2  
Old 01-29-2014, 05:46 PM
nuclearlemon's Avatar
nuclearlemon nuclearlemon is offline
Hard Core 4+
 
Join Date: Aug 2005
Location: denver
Posts: 5,738
Default

what vintage? and what brand pto?
__________________
ige tlca #1431
Reply With Quote
  #3  
Old 01-29-2014, 05:52 PM
TonkaToy's Avatar
TonkaToy TonkaToy is offline
Rising Sun Member
 
Join Date: Jul 2010
Location: Thornton, Colorado
Posts: 175
Default

73. The winch is a Rhino and the PTO gearbox appears to be stock, no other markings on it.
It's the one that you looked at the carb on last year but it was the wrong type, for what you needed.
Reply With Quote
  #4  
Old 01-29-2014, 08:35 PM
cruiseroutfit's Avatar
cruiseroutfit cruiseroutfit is offline
Wasatch Cruisers
 
Join Date: Aug 2006
Location: Sandy, UT
Posts: 274
Default

Hmmm, I've got a 1972 that is in dire need of a drivetrain. Headed to Cruise Moab?
__________________
Kurt Williams
CruiserOutfitters.com
U4WDA, Wasatch Cruisers, TLCA, RR4W, Mountain Yoats 4x4
Reply With Quote
  #5  
Old 01-29-2014, 08:46 PM
TonkaToy's Avatar
TonkaToy TonkaToy is offline
Rising Sun Member
 
Join Date: Jul 2010
Location: Thornton, Colorado
Posts: 175
Default

Not this year, I'm afraid.
Reply With Quote
  #6  
Old 01-29-2014, 08:59 PM
cruiseroutfit's Avatar
cruiseroutfit cruiseroutfit is offline
Wasatch Cruisers
 
Join Date: Aug 2006
Location: Sandy, UT
Posts: 274
Default

Quote:
Originally Posted by TonkaToy View Post
Not this year, I'm afraid.
No worries. If I can figure out a way to get it to Moab (or SLC), I may be interested in the lot.
__________________
Kurt Williams
CruiserOutfitters.com
U4WDA, Wasatch Cruisers, TLCA, RR4W, Mountain Yoats 4x4
Reply With Quote
  #7  
Old 01-29-2014, 09:05 PM
TonkaToy's Avatar
TonkaToy TonkaToy is offline
Rising Sun Member
 
Join Date: Jul 2010
Location: Thornton, Colorado
Posts: 175
Default

I can pack and load as needed, just let me know.
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On


All times are GMT -6. The time now is 12:23 AM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.