Rising Sun Member Forums  

Go Back   Rising Sun Member Forums > Toyota 4x4 > General Tech Forum

Thread Tools
Old 05-20-2014, 08:36 AM
aprosise's Avatar
aprosise aprosise is offline
Trail Ready
Join Date: Mar 2014
Location: Boulder, Co
Posts: 446
Default Rear axle purging gear oil

Hopefully somebody has some insight on this...
I won a Nitro Offroad Diff cover for my 60 series at Cruise Moab, I put it on when I got back and refilled my rear axle with the appropriate amount of oil, just below the fill hole...or so I thought.

Now, it's purging gear oil out of the breather. A good amount, enough to wet the whole right leaf and bottom of the gas tank. Ive pull the breather tube off and cleaned it and checked function. All seems fine there.

Any ideas?
Reply With Quote
Old 05-20-2014, 01:36 PM
BritKLR BritKLR is offline
Join Date: Oct 2012
Location: ATC HQ - Nederland, Colo.
Posts: 162

When I first got my 60 and drained and refilled the rear diff it did the exact same thing. The only thing I concluded was I didn't wait long enough, once filled, for the slight extra fluid I filled to drain out. Maybe I had less then an ounce extra in it, but boy did it gush like a fire hose out of the breather once it got heated. So, you may have just slightly too much fluid in it.

Good luck!
Paul Carrill
Adventure Tool Company LLC



"Like" us on Facebook:
Reply With Quote
Old 05-20-2014, 02:04 PM
FJBRADY's Avatar
Rising Sun Member
Join Date: Oct 2008
Location: Highlands Ranch
Posts: 2,248

Sounds like its puking excess oil.
Steve Brady
TLCA # 19524

97 LX450
Reply With Quote
Old 05-20-2014, 03:44 PM
60wag's Avatar
60wag 60wag is offline
Rising Sun Member
Join Date: Aug 2005
Posts: 1,871

The vent is on the top of the axle tube. It would take a lot of extra oil to raise the level up to the vent tube - way more than you could squirt in the fill hole. Any chance the truck was parked at a pretty severe side angle that may have made the level high on the downhill side of the axle?
'03 KTM 450EXC
"If you know what you're doing, then you aren't learning anything." - A. Lincoln
Reply With Quote
Old 05-21-2014, 10:57 AM
aprosise's Avatar
aprosise aprosise is offline
Trail Ready
Join Date: Mar 2014
Location: Boulder, Co
Posts: 446

The axle was filled on level ground, and I did not fill it until is overflowed. Per the shop manual, I filled until oil was slightly below the fill hole, but not overflowing. Im guessing with the new diff cover I have more oil capacity, but that shouldn't make it overflow.

Ill keep an eye on it my levels. I know its full so I shouldn't be worried about starving it at least.
Reply With Quote
Old 05-21-2014, 12:17 PM
AimCOTaco's Avatar
AimCOTaco AimCOTaco is offline
Cruise Moab Committee
Join Date: Aug 2010
Location: Longmont CO 80501
Posts: 499

Probably is just adjusting it's self. I occasionally see the same thing. The vent is on top but of course the oil is slung when running so it can definitely be expelled at the vent.
Andy | Longmont | TLCA#22354
Follow CRUISE MOAB on Facebook
-1999 UZJ100 -Black, GYDT285/75-16, Locked, WKOR sliders, TC UCAs/ Iron Man T-bars, OME866, D/T headers/Magnaflow, Columbus RTT, Drawers n'stuff.
-2001 Tacoma 2.7L Reg Cab 4x4 -Silver,my DD/trail truck, Icon/TC mid trav front, GYDT265/75-16C, Budbuilt Skids

Reply With Quote

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -6. The time now is 07:35 PM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.