Rising Sun Member Forums  

Go Back   Rising Sun Member Forums > Toyota 4x4 > General Tech Forum

Reply
 
Thread Tools
  #11  
Old 10-23-2006, 01:22 PM
Rezarf's Avatar
Rezarf Rezarf is offline
Hard Core 4+
 
Join Date: Aug 2005
Location: In Uncle Ben's Shadow
Posts: 4,385
Default

Quote:
Originally Posted by red cruiser
Thanks to you all for the suggestions, looks like it'll be fine. I'll shoot for getting it done in under 27 hours.

Drew, if I'm not done by next week I may call on you
Sounds good Chris, if you get in a jam, just give a hollar and we will walk you through it.

Drew
__________________
Rezarf <><
My rig... "Maude"
1976 FJ40 with some stuff and some leaks.

1999 UZJ 100 Series bone stock ready to rock AKA:The backup minivan

2012 Toyota Sienna Minivan, fastest Toyota in the stable.

My camping trailer build up thread.

"You 80 guys are just a Sawzall away from nirvana." -Red Chili
Reply With Quote
  #12  
Old 10-23-2006, 02:01 PM
Romer's Avatar
Romer Romer is online now
Rising Sun Member
 
Join Date: Aug 2005
Location: Englewood, Colorado
Posts: 7,351
Default

I think this will be very similar to the 80. You might find this helpful:

http://forum.ih8mud.com/showthread.php?t=78276
__________________
Ken Romer - K0ROM
04 UZJ100
77 FJ40
11 RX350
02 Kimberley Kamper

Reply With Quote
  #13  
Old 10-23-2006, 07:05 PM
Chris's Avatar
Chris Chris is offline
Hard Core 4+
 
Join Date: Mar 2006
Location: Front Range
Posts: 992
Default

Thanks for mentioning that great write-up Ken. Thought I'd read all there was to read. Guess it's worth browsing the non 60 series stuff now and then.

I'm sure that has helped a lot of people tackling this for the first time. It's beginning to feel much less intimidating.
__________________
2005 4Runner Ltd
Living in the Slow Lane
Reply With Quote
  #14  
Old 10-24-2006, 05:12 PM
Crash's Avatar
Crash Crash is offline
Rising Sun Member
 
Join Date: Aug 2005
Location: Denver
Posts: 2,120
Default

Got it done yet?
Reply With Quote
  #15  
Old 10-24-2006, 07:05 PM
Chris's Avatar
Chris Chris is offline
Hard Core 4+
 
Join Date: Mar 2006
Location: Front Range
Posts: 992
Default

Quote:
Originally Posted by Crash
Got it done yet?
Almost.

Almost got one side done that is

Didn't need the 54mm hub socket on the drivers side, loose enough to do by hand.

Subzali, 6 hours down, looking like that beer might not be mine. But I haven't touched the right side yet
__________________
2005 4Runner Ltd
Living in the Slow Lane
Reply With Quote
  #16  
Old 10-24-2006, 07:10 PM
nakman's Avatar
nakman nakman is offline
Rising Sun Commander
 
Join Date: Aug 2005
Location: north side
Posts: 10,253
Default

Quote:
Didn't need the 54mm hub socket on the drivers side, loose enough to do by hand.
Yikes!!! does the spindle look ok? that's too loose, obviously.

Quote:
Subzali, 6 hours down, looking like that beer might not be mine. But I haven't touched the right side yet
Not a bad time, I bet the other side takes 3.5. doesn't look like either one of you guys get to start drinkin' over this... prolly a good thing.
__________________
82 fj40, 99 uzj100, 06 gx470

05 525EXC, 01 XT225, 07 TTR90, 07 CRF50

www.gamiviti.com

Reply With Quote
  #17  
Old 10-24-2006, 07:29 PM
Chris's Avatar
Chris Chris is offline
Hard Core 4+
 
Join Date: Mar 2006
Location: Front Range
Posts: 992
Default

Quote:
Originally Posted by nakman
Yikes!!! does the spindle look ok? that's too loose, obviously.
I was surprised that they were so loose and more surprised that the spindle looks fine. Not jumping to conclusions but suspect I won't have the vibration I had before this.

Quote:
Originally Posted by nakman
Not a bad time, I bet the other side takes 3.5. doesn't look like either one of you guys get to start drinkin' over this... prolly a good thing.
After 25 years of sobriety I agree
__________________
2005 4Runner Ltd
Living in the Slow Lane
Reply With Quote
  #18  
Old 10-24-2006, 09:30 PM
farnhamstj's Avatar
farnhamstj farnhamstj is offline
Hard Core 4+
 
Join Date: Aug 2005
Location: vail co
Posts: 2,592
Default

Good luck. Now get off the computer and get back in the garage.
__________________
98 uzj100. Factory rear-ARB front locked 4.88's. ARB Bull, Warn 9000, Irbis rear bumper, Slee sliders and belly pan. OME t-bars w/863 rears, HID, XM
KD0GWO
Reply With Quote
  #19  
Old 10-25-2006, 08:58 AM
Chris's Avatar
Chris Chris is offline
Hard Core 4+
 
Join Date: Mar 2006
Location: Front Range
Posts: 992
Default

Ok, ok, ok, I'm going...


Now that it's morning
__________________
2005 4Runner Ltd
Living in the Slow Lane
Reply With Quote
  #20  
Old 10-25-2006, 07:57 PM
Chris's Avatar
Chris Chris is offline
Hard Core 4+
 
Join Date: Mar 2006
Location: Front Range
Posts: 992
Default

Knuckle rebuild, is done. New rotors, calipers and pads too.

Almost

2 minor problems

1. The diff fill plug is boogered and I haven't been able to get it out. Any suggestions appreciated. After going through this it's kind of frustrating not to be able to refill it

2. Lesson for today - brass drift will damage wheel studs. Picking up new ones and would like to press them in properly. Anyone have a press and availability tomorrow?

Mr. Crase, I think I recall such an addition to your garage, you have a PM
__________________
2005 4Runner Ltd
Living in the Slow Lane
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -6. The time now is 08:46 AM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.