Rising Sun Member Forums  

Go Back   Rising Sun Member Forums > Toyota 4x4 > General Tech Forum

Reply
 
Thread Tools
  #1  
Old 09-25-2006, 10:53 AM
wesintl's Avatar
wesintl wesintl is offline
Hard Core 4+
 
Join Date: Aug 2005
Location: in da house
Posts: 7,595
Send a message via AIM to wesintl
Default Fuel Pump

what are folks doing for fuel pumps on early 40's? up to 76? using the 76-78?

My fuel pump was spewing fuel. I put on one el jefe gave me off a 64 and it was even worse. Fuel spill as big as the cruiser underneth.

Toyota doesn't have any old ones nor do they make overhaul kits. I ordered a 76-78 but the intake to the pump is different than the early style. I guess I'll try and get some fittings to adapt it..

Anyone BTDT?
__________________
See you on the trail
WREK
Couple o' FJ40's, BJ70, UZJ100, TDI 66FJ40,82FJ60,97FZJ80
TLCA#4180
Reply With Quote
  #2  
Old 09-25-2006, 12:03 PM
subzali's Avatar
subzali subzali is offline
Rising Sun member
 
Join Date: Aug 2005
Location: Denver CO
Posts: 7,632
Default

IIRC, there is a difference in the lever between early and later pumps that makes them incompatable. When mine was leaking I had to find someone with one that worked. But I'm saving my old one in hopes that someday somebody will make a rebuild kit!
__________________
Matt Miller
TLCA# 13684
Rising Sun Bio
1977 FJ40 2F "Brahma" + Lockright, tach, Warn 8274, FJ60 Power Steering, soon to lose the Sanden OBA to go back to factory emissions
1996 FZJ80 1FZ-FE factory lockers + Safari Turbo , CDL switch, cup holder, Metric TLC leather, heated seats and JDM switches
2000 Tundra Limited TRD 2UZ-FE SOLD
Reply With Quote
  #3  
Old 09-25-2006, 12:44 PM
wesintl's Avatar
wesintl wesintl is offline
Hard Core 4+
 
Join Date: Aug 2005
Location: in da house
Posts: 7,595
Send a message via AIM to wesintl
Default

I've heard that you can just buy diaphram material and overhaul it. I haven't looked into that.

The lever is the same it's just whether or not you need to use a spacer. The later 2f's I believe you do on the F's I don't think you need to. Mine doesn't have a spacer so I don't think i'll need it. Initial thoughs have been to buy the new one and use the new parts to rebuild the old one. I dunno if i'm going that route though. I'll most likely use the new one and use a L bend if needed from the local ace or whatever.
__________________
See you on the trail
WREK
Couple o' FJ40's, BJ70, UZJ100, TDI 66FJ40,82FJ60,97FZJ80
TLCA#4180
Reply With Quote
  #4  
Old 09-25-2006, 03:07 PM
SROR/AKA 2BAD SROR/AKA 2BAD is offline
Hard Core 4+
 
Join Date: Sep 2006
Location: somewhere out there
Posts: 700
Default

electric
Reply With Quote
  #5  
Old 09-25-2006, 03:46 PM
treerootCO's Avatar
treerootCO treerootCO is offline
Rising Sun Member
 
Join Date: Aug 2005
Posts: 4,550
Send a message via AIM to treerootCO
Default

The fuel pump style is basicly the same from 1958-12/78. The new style ran from 1/79-8/87 but you will need a spacer to adapt the new stlye to an older engine.

I was working on finding all the subtle differences at one point. Starting in around 73?, there are two input bosses on the pump. When the new style oil filter was adapted, 73/74, they moved it from the inboard hole to the other one. Before that, it was a straight fitting, after there were a few different versions. The really early ones had the self priming lever.

Carquest sometimes carries OE pumps. Napa, checker, sor, all carry the sme aftermarket brand. I prefer OE.

In the 2nd pic down you can see the two input bosses. Only one is drilled and tapped. In approx 73/74 there was an angled fitting so this one will come up differently in the parts books.
Attached Images
   
__________________
aka Mike D.----->Bio Page KDGWY
He who goes unarmed in paradise had better be sure that that is where he is.James Thurber
"Its better to be thought a fool rather than to speak up and remove all doubt." - Lincoln
pride is ego, the word I had lost was dignity. The quality or state of being worthy of esteem or respect.
Ptarmigan build thread - 95FZJ80
www.root45.com
www.risingsun4x4club.org

TLCA #14133

Reply With Quote
  #6  
Old 09-25-2006, 05:09 PM
wesintl's Avatar
wesintl wesintl is offline
Hard Core 4+
 
Join Date: Aug 2005
Location: in da house
Posts: 7,595
Send a message via AIM to wesintl
Default

the first 2 are in a nut shell the same pump.

The one I ordered has a soft line barb 76-78 input and the output is the same. At least I can use my exiting fitting. The intake looks like I can unscrew the rubber hose barb and use my existing fitting but it's vertical. I need to use a 90* and then hopefully the existing line will reach.

I could try cacrquest. The napa pump looks to be what I want.
__________________
See you on the trail
WREK
Couple o' FJ40's, BJ70, UZJ100, TDI 66FJ40,82FJ60,97FZJ80
TLCA#4180
Reply With Quote
  #7  
Old 10-01-2006, 04:59 PM
wesintl's Avatar
wesintl wesintl is offline
Hard Core 4+
 
Join Date: Aug 2005
Location: in da house
Posts: 7,595
Send a message via AIM to wesintl
Default

I ordered the one above and removed the 90*. I didn't use an insulator block. One, because I don't have one and two, the spring measured the same distance from the mounting surface as the old ones. This was a Beck Arnley but inside the box was a kyokian Densi (japan) or whatever they call themselves.
Attached Images
 
__________________
See you on the trail
WREK
Couple o' FJ40's, BJ70, UZJ100, TDI 66FJ40,82FJ60,97FZJ80
TLCA#4180
Reply With Quote
  #8  
Old 10-03-2006, 01:13 AM
Hulk's Avatar
Hulk Hulk is offline
Cruise Moab Committee
 
Join Date: Aug 2005
Location: South Side!
Posts: 11,463
Send a message via AIM to Hulk
Default

Looks good. Wes, I need to come over to your house and drink some beer in your garage.
__________________
Matt Farr, Centennial, Colorado | Webmaster: TLCA.org
1996 FZJ80 TLCA #4189 WRDY
www.rustybrain.com/cruisers my Rising Sun bio Facebook Twitter Need satellite Internet? Check out: Exede Internet

If you think you can or think you can't, you're right.
Reply With Quote
  #9  
Old 11-02-2006, 04:42 PM
wesintl's Avatar
wesintl wesintl is offline
Hard Core 4+
 
Join Date: Aug 2005
Location: in da house
Posts: 7,595
Send a message via AIM to wesintl
Default

http://cgi.ebay.com/FUEL-PUMP-REPAIR...QQcmdZViewItem

I guess I could overhaul the oem pump at some point.
__________________
See you on the trail
WREK
Couple o' FJ40's, BJ70, UZJ100, TDI 66FJ40,82FJ60,97FZJ80
TLCA#4180
Reply With Quote
  #10  
Old 11-02-2006, 04:49 PM
subzali's Avatar
subzali subzali is offline
Rising Sun member
 
Join Date: Aug 2005
Location: Denver CO
Posts: 7,632
Default

I think I got my replacement fuel pump for less than that, which makes me wonder if you (read SOR, CCOT, whoever else) could make any money selling a rebuild kit for the pumps. Probably not, since the pumps seem to be pretty cheap.
__________________
Matt Miller
TLCA# 13684
Rising Sun Bio
1977 FJ40 2F "Brahma" + Lockright, tach, Warn 8274, FJ60 Power Steering, soon to lose the Sanden OBA to go back to factory emissions
1996 FZJ80 1FZ-FE factory lockers + Safari Turbo , CDL switch, cup holder, Metric TLC leather, heated seats and JDM switches
2000 Tundra Limited TRD 2UZ-FE SOLD
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -6. The time now is 01:38 PM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.