Rising Sun Member Forums  

Go Back   Rising Sun Member Forums > Toyota 4x4 > General Tech Forum

Reply
 
Thread Tools
  #11  
Old 01-02-2007, 06:45 PM
Rzeppa's Avatar
Rzeppa Rzeppa is offline
Cruise Moab Committee
 
Join Date: Aug 2005
Location: Kittredge CO, USA
Posts: 5,213
Default

Quote:
Originally Posted by isotel View Post
I had a Dished out Spacer that came with mine.. I Called Shot an e-mail to Aussie locker with photos. He said its just an abnormality with the milling process or some crap like that.. He sent out a new spacer and a free t-shirt.. Now that im thinking about it, i guess the dished out one will work fine.. aslong as the smallest gap is in spec.
That's a load of cr@p. Their manufacturing process does not involve milling number one, and second there's no way any machining process (I've spent a LOT of time running mills and lathes) could possibly come up with those dimensions. If you weren't paying ANY attention the worst you could do would be about .002, not .005. With CNC it would be more like .0005. The problem is with their powder-metal sintering process, not with machining.

In any event, like I wrote, from an engineering standpoint, the parts should operate as-intended with the dimensions written, even if their quality control sucks. I just hope the hardness and tensile strength is properly distributed as the design was intended.
__________________
Jeff Zepp
Kittredge CO USA
1971 & 1976 FJ40s, 1978 FJ45, 1987 FJ60
Rising Sun 4WD Club, TLCA #4063
http://american3dprinting.net/
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -6. The time now is 10:09 PM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.