Rising Sun Member Forums  

Go Back   Rising Sun Member Forums > Toyota 4x4 > General Tech Forum

Reply
 
Thread Tools
  #1  
Old 03-08-2006, 06:22 PM
gcmandrake's Avatar
gcmandrake gcmandrake is offline
Lifted
 
Join Date: Aug 2005
Location: Littleton, CO
Posts: 192
Default Vibrations II

I've reported in this list (probably a couple of times) about vibrations I've been getting centering around my transmission/drive-shaft. Originally, I thought it was the driveline angle. Using Roger Brown's info about drive shafts , I measured the angle. I installed a shim , which brought the angle to a more reasonable value. I think that helped reduce the vibration, but not by much. So, I did another round of peering under the truck and discovered that the insulator (that's what Toyota calls it) bushings that sit between the cross-member and the transmission were cracked and pulling away from the metal. I stopped by Off Road Solutions and spoke with Mike Caskey and we drove around a little (boy, he's great) and he definately felt the vibrations. He pointed out the insulator and a problem with the rear u-joint. He thought that could be a first cut.

I replaced the insulator and drove it around a bit. The vibrations had now shifted further to the rear. (I'm glad it did, since I was worried about the output bearings of the transfer case.) This past weekend I replaced the u-joint and on Monday I brought the driveshaft to Drive Line Service in Colorado Springs (fairly close to my new office). Nice people, very fast, and I think reasonable ($50). So last night I replaced the drive shaft and realized that I was out of grease to lube the shaft. Bummer. Hopefully, this will do the trick.

Thanks guys for all your help with this. This could be very cool. Only a few more projects until Cruise Moab.

Matt
__________________
'07 FJ Cruiser
Reply With Quote
  #2  
Old 03-09-2006, 05:51 PM
farnhamstj's Avatar
farnhamstj farnhamstj is offline
Hard Core 4+
 
Join Date: Aug 2005
Location: vail co
Posts: 2,576
Default read this

http://www.pirate4x4.com/tech/billav...aft/index.html Don't really have any great ideas but maybe you'll find something useful.
__________________
98 uzj100. Factory rear-ARB front locked 4.88's. ARB Bull, Warn 9000, Irbis rear bumper, Slee sliders and belly pan. OME t-bars w/863 rears, HID, XM
KD0GWO
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -6. The time now is 01:19 AM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.